Filter Ranges By:

The wide range of Power-Sonic rechargeable AGM batteries ensures whatever your application there is a battery designed to suit your requirements.

Find out more

Power Sonic UPS

The Power Sonic range of UPS solutions provides uninterrupted power to support critical equipment in an easy to install and compact design.

More Info

Power-Sonic DCG Series

The special gelled electrolyte of the Power-Sonic Deep Cycle Gel (DCG) range which is more tolerate to drying out makes them ideal for tighter space requirements and higher temperature environments and able to withstand higher levels of vibration.

More Info

Power-Sonic Lithium Series

Lithium based technology is becoming increasingly popular due to it high cycle life and reduced weight. There are a number of different Lithium technologies which exist, each with their own set of characteristics, the range from Power-Sonic are of the Lithium Iron Phosphate (LiFePO4) composition. LiFePO4 has high current rating, long cycle life is tolerant to full charge and most importantly is one of the safest Lithium technologies available.

More Info

Power-Sonic PDC Series

Power-Sonic deep cycle PDC range is purpose built for those applications which require regular and consistent cycling (charge and dis-charge). Commonly called deep cycling the oversized negative plates and a specialised paste formulation of the PDC can provide constant power for longer periods of time without shortening the life of the battery.

More Info

Power-Sonic PG Series

With a thicker plate design, the Power-Sonic PG range are designed specifically for those critical standby power applications. When you have a requirement for higher discharge, 10 year design life or flame retardant case the PG range is what you require.

More Info

Power-Sonic PGFT Series

All the benefits of the PG range but with the added feature of easy to use front terminal connection. The convenient dimensions paired with the F1 or F2 front terminal connectors allow ease of installation and maintenance when installed in a battery cabinet.

More Info

Power-Sonic PS 6 Volt Cyclic Series

The Power-Sonic range of AGM VRLA batteries are manufactured with Absorbent Glass Mat (AGM) technology for superior performance allowing greater cyclic performance, enhanced overcharge endurance and excellent recovery form over discharge situations.

More Info

Power-Sonic PS Series

Power-Sonic PS Series have been evaluated and APPROVED by ActivFire CSIRO. Designed for general purpose standby and light cyclic applications, the Power-Sonic PS range is a great economical option. Featuring all of the excellent Power-Sonic characteristics outlined in the overview, they have been designed as a low lost alternative.

More Info

Power-Sonic PSH Series

Power-Sonic PSH and PHR series batteries are designed specifically for high-rate discharge (UPS) applications. The construction the PSH ensures constant power.

More Info

Power-Sonic PSS Series

The Power-Sonic range of AGM VRLA batteries are manufactured with Absorbent Glass Mat (AGM) technology for superior performance allowing greater cyclic performance, enhanced overcharge endurance and excellent recovery form over discharge situations.

More Info

Power-Sonic Tubular Gel

The Tubular Gel range from Power-Sonic has been specifically designed for longer life, greater reliability and stronger resilience to elevated temperature making it perfect for energy storage and critical power applications. A cycle life of close to 3 times that of the Solar SLA range means the tubular gel option is one of the most economically viable over the life of the system, especially for off grid solar systems.

More Info

Power-Sonic Rechargeable Batteries

The Power-Sonic Corporation has been a leading force since 1970 in the supply of high-quality cost effective AGM batteries. SPB is proud to be the exclusive distributor for the Power-Sonic rechargeable range of sealed lead acid batteries distributing throughout Australia, New Zealand and the Pacific Islands. The Power-Sonic rechargeable battery ranges encompass a broad spectrum of electronic and industrial applications, either as the prime or standby power source.

The wide range of Power-Sonic rechargeable batteries ensures whatever your application there is a battery designed to suit your requirements.

The entire Power-Sonic AGM VRLA range offers the following features.

Sealed/Maintenance-Free

The valve regulated, spill-proof construction allows trouble free, safe operation in any position. There is no need to add electrolyte, as gases generated during overcharge are recombined in a unique “oxygen cycle.”

Valve Regulated Design

Our batteries incorporate a series of one-way low pressure valves. These self-sealing valves allow the venting of any excess gasses that may be produced in the battery due to severe overcharging, thus increasing safety through the prevention of dangerous over expansion of the casing.

Design Flexibility

Batteries may be used in series and/or parallel to obtain choice of voltage and capacity. Due to recent design breakthroughs, the same battery may be used in either cyclic or standby applications. Over 60 models are available to choose from.

Compact

Power Sonic rechargeable batteries use state-of-the-art design, high grade materials, and a carefully controlled plate-making process to provide excellent output per cell. The high energy density results in superior power/volume and power/weight ratios.

Rugged Construction

The high impact resistant battery case is made of nonconductive ABS plastic to UL94-HB. This material imparts very good resistance to shock, vibration, chemicals and heat. Certain models feature flame retardant (FR) cases/covers to UL94 V-O.

Wide Operating Temperature Range

Power-Sonic batteries may be discharged over a temperature range of -40°C to +60°C (-40°F to +140°F) and charged at temperatures ranging from -40°C to +50°C (-40°F to +122°F).

Long Service Life

Under normal operating conditions, four or five years of dependable service life can be expected in stand-by applications, or between 200 and 1000 charge/ discharge cycles depending on the average depth of discharge.

Deep Discharge Recovery

Special separators, advanced plate composition, and a carefully balanced electrolyte system have greatly improved the ability to recover from excessively deep discharge.

Lead Calcium Plates

Heavy duty lead calcium plates provide an extra margin of performance and life in both cyclic and float applications and give unequaled recovery from deep discharge.

Economical

The high watt-hour per dollar value is made possible by the materials used in a sealed lead-acid battery: they are readily available and low in cost.

Operation in any Orientation

Our SLA batteries can be charged & discharged in any orientation except upside down without reduction in performance or leakage of electrolyte.

High Rate Discharge

Low internal resistance allows discharge currents of up to ten times the battery’s rated capacity. Relatively small batteries may thus be specified in applications requiring high peak currents.

Long Shelf Life

A low self-discharge rate allows storage of fully charged batteries for extended periods of time before charging is required. Lower storage temperatures further enhance shelf life characteristics.

 

Visit the Power-Sonic USA site

See compliance certificates